Download Article

Download Article

Sometimes video-game consoles can collect a lot of dust, leading to loud racket from the fan, and a lot of oestrus generated from the rut sink. This makes it crucial to often dismantle and make clean the inside of your console in order to maintain its condition. Given that this can be a tedious and complex process, the following steps will demonstrate how to consummate this process specifically for a PS4 Slim.

  1. 1

    Shut downwardly and unplug the PS4 Slim. Identify it on an open tabular array in a clean surroundings.

  2. two

    Pull firmly on the front end corners and front border. Unclip the summit cover, then slide it dorsum to remove information technology.

    • Continue in mind, newer PS4 Slims which have not been dismantled before may require more firmness when pulling.

    Advertising

  3. 3

    Remove the encompass to betrayal two metallic plates: Ane shielding the fan and heatsink and some other reflective metal plate on summit of the battery pack.

  4. 4

    Remove the screws. Preferably, use a T8 or T9 Security Torx to remove the ii long screws belongings in the reflective metal plate.

  5. five

    Remove the reflective metal plate and unscrew the other long screws belongings in the rest of the battery pack.

  6. 6

    Elevator up the battery pack just enough to be able to uncover the lip of the pack. This will permit y'all to remove the metal plate shielding the fan and heatsink.

    • Make sure you do not take out the entire battery pack, as at that place is no need to do so.

  7. seven

    Remove all the screws holding the metal plate and remove the plate to fully expose the fan and heatsink.

    8. Ad

  1. 1

    Clean the outer vents. Utilize a modest brush and canned air to clean the outer vents and intake ports around the sides of the console.

  2. 2

    Clean the heatsink. Utilise the same castor to clean the heatsink, as well equally canned air for a deeper clean.

  3. 3

    Clean the fan and blades. Use canned air and cotton wool swabs dipped in rubbing alcohol to thoroughly clean the fan and its blades.

    4. Advert

  1. 1

    Identify the metal plate used to cover the fan and heatsink back into its proper spot. Spiral back in the screws.

    • This volition exist the nigh tedious part of the procedure, equally it can exist difficult to spiral dorsum in the screws due to their size.

  2. 2

    Firmly push downwards on the battery pack so information technology is fully locked back in place. Proceed to spiral in the screws.

  3. iii

    Put the reflective metal plate on top of the battery pack in its original spot. Once again, screw back in the screws.

  4. 4

    Slide and snap the meridian cover back into place.

    5. Advertisement

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

Things You lot'll Demand

  • Small-scale brush
  • Cotton fiber Swabs
  • Rubbing booze
  • Canned air
  • T8 or T9 security torx
  • Electrical screwdriver

  • Place all screws in a secure location and organized fashion to ensure yous exercise non lose them and can reassemble as quickly as possible.

  • DO Non flip over the PS4 Slim at any betoken during this process

Thanks for submitting a tip for review!

Advertizing

References

Near This Article

Thanks to all authors for creating a page that has been read 69,037 times.

Did this article help you?